New Front Subframe

Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ

Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ

Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ  Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ
NEW Racetune Solid Front Subframe Bushes ONLY. Suit Toyota Soarer JZ and UZ Platforms - eg: TT and V8 and Non Turbo. I broke 2 Diffs due to axle tramp. 1 Torsen A series Diff and 1 TRD A series diff.

We have seen broken diff hats and broken B Series Diffs (6spd RZ). Axle Tramp is the enemy of traction. It overloads components by hammering the drive train until it breaks. It's causes are largely due to harmonics in the IRS setup and low traction conditions.

We broke both diffs under power when changing from 2nd to 3rd gear while losing traction due to a combination of power, not so good tyres and road surface. Once it gripped, it chipped the teeth on the crown and pinion wheels. Racetune have engineered a solution based on our own experience and existing products and have made it accessible to all.

Factory bushes are nearly impossible to find in stock world wide at the same time and are more expensive! We have engineered a unique solution with the ease of installation with hand tools.

You may need a press for the front diff ears depending on your diff setup and the rear diff bushes are the weld-in type. Guaranteed Fit for the following subframes and diffs. JZA80 Supra 6spd V160 B03B Diff and Subframe.

JZA80 Supra 6spd V161 A03B Diff and Subframe. JZA80 Supra 5spd & Automatic. A series diff and Subframe. JZZ30/1 Soarer 5spd & Automatic A series diff and Subframe. UZZ30/1/2 Soarer Automatic A series diff and Subframe.

All JZ UZ Supra and Soarer makes and models. All A0xA, A0xB and B0xB diffs found in the Supra/Soarer Platform. The Racetune Bush Kit replaces all Front Subframe Bushes.

The factory rubber bushes are usually flogged out and not centered anymore. 1x Front Subframe Bush Set Gold or Black Anodize finish. Please message us at checkout which one you would like, or we will choose gold or black. Real world results and info when using a full set. Our customer feedback from installation and from our own car install is as follows. Car is more predictable and more fun to drive.

Doesn't feel unsafe, awkward or unbalance when drifting. Tyre ware on semi slicks is more even. Drag racing - minimizes axle tramp to just the spring harmonics which you can dampen out with the shock.

Diff pinion angle doesn't change under load - direct transmission of power. Eliminates all axle tramp caused by wheel/subframe harmonics - you can tune the spring rate tramp with your damper. Proven fitment with installation support via messenger from people that have actually installed the item! Can be installed with hand tools, however for speed we recommend using an air chisel and hacksaw when doing the diff bushes.

Installation available in Melbourne, Victoria. We will need to remove the entire subframe and diff assembly. CNC machined Billet Steel Front Subframe Bushing. Instructions available for installation as well as tech support/tips. We run this in our own Daily Driver 600HP Supra with semi slicks and have stopped breaking diffs due to axle tramp.

Bulk orders and workshop pricing welcome for 5 or more quantity. The item "Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ" is in sale since Thursday, June 2, 2016. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts\Transmission\Shifters". The seller is "driftshop-au" and is located in Melbourne, VIC. This item can be shipped worldwide.

  • Manufacturer Part Number: RT-JZA80-FDIFFB-GLD , RT-JZA80-FDIFFB-BLK
  • Brand: Racetune
  • Material: Billet Aluminium 6061-T6


Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ  Racetune SOLID Front Subframe Bushes Suit Toyota Supra Soarer JZA80 2JZ 1JZ 1UZ