BMR Suspension CB006, Chassis Brace, Front Subframe, 4-point, 2015-2020 Mustang

  
CB006 - Chassis Brace, Front Subframe, 4-point. BMR Suspension components are proudly hand Made In USA by American workers in our manufacturing facility near Tampa, Florida. We cut, bend, notch, drill, weld, mill, powder coat and package all our high quality performance components from American-made DOM and Chrome-Molly steel.

Increase steering stability, K-member rigidity, and reduce front alignment changes on your S550 Mustang with a front Chassis Brace from BMR Suspension. The factory K-member and lower control arm mount can deflect under hard braking and extreme lateral loading. Built from a mixture of heavy-duty 2 1/4-inch DOM steel and 1- by 1.5-inch rectangular tubing, BMRs CB006 Chassis Brace is designed to support and stiffen the factory S550 K-member and front suspension.

This increases steering feel and stability during aggressive braking and maneuvering. BMRs CB006s front Chassis Brace ties the front lower control mounts to the rear legs of the K-member. The design reinforces every major area of the K-member effectively reducing deflection when fore, aft, and lateral loads are applied to the chassis. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes lower control arm mounts and K-member deflection with no change in NVH.

This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR Suspensions CB006 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.

NOTE: The Brace does not fit V6 models. It also does not fit 2015+ Mustang V8 applications with Kooks Long Tube Headers. 100% bolt-on design - Fits ALL: EcoBoost, GT and GT350 Mustangs - No fabrication needed - Installs with simple hand tools - Manufactured from DOM and square steel tubing - CNC-machined billet aluminum spacers - Reinforces front lower control arm mounts - Greatly reduces K-member deflection - Uses factory boltholes and hardware - Works with stock and most aftermarket headers and exhaust systems (Does not fit with Kooks LT Headers) - No change in NVH - Durable powdercoat finish - Available in black hammertone and red powdercoat - Proudly designed in the U. Proudly built in the U.

These are available in RED or BLACK HAMMERTONE powder coat. 2015 - 2018 Ford Mustang Please see the "Compatibility" link at the top of the listing. Proudly Made in USA By American Workers! Hen BMR Suspension began back in 1998, it was difficult for performance automotive enthusiasts to find suspension products that had an innovative design and quality construction at an affordable price. BMR turned this market void into a business philosophy, and has been serving our customer's needs ever since.

In a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department.

By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro. BMR's current project vehicles include a 2019 Mustang GT, a 2016 Camaro, a 2016 Challenger Scat Pack, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro. As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS, a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO.

But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well. This love of racing is demonstrated everyday in BMR's customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. When performance is a must, rely on BMR Suspension!

BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. BMR product is designed to be used with OEM product and other BMR products. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. The item "BMR Suspension CB006, Chassis Brace, Front Subframe, 4-point, 2015-2020 Mustang" is in sale since Thursday, June 27, 2019.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Other". The seller is "bmr_suspension_inc" and is located in Seffner, Florida.

This item can be shipped worldwide.

• Kit or Single Part: Kit
• Surface Finish: Powder coated
• Country of Manufacture: United States
• Country/Region of Manufacture: United States
• Interchange Part Number: BMR-CB006
• Manufacturer Part Number: CB006
• Placement on Vehicle: Front
• Other Part Number: CB006H, CB006R
• Brand: BMR Suspension
• Warranty: Yes